Manufacturer & Exporter of Sheet Metal Machineries
Rajesh Power Press
CNC Profile Bending Machine
RP Pro 35 & RP Pro 45 Standard Features
- Cast iron body (apk 35).
- Steel construction body (apk 30).
- The shaft is made of special steel, hardened and ground.
- One set of hardened rolls.
Driven lower rolls. - Guide rolls.
- Foot pedal.
- Horizontal & vertical working.
- Production quality certified by ce, iso9001-2015, isek ve turqum.
RP Pro 50 & RP Pro 60 Standard Features
- Steel (st-52) construction body.
- The shaft is made of special steel, hardened and ground.
- One set of standard rolls
- On apk45, all 3 rolls are motorized
- On apk45 upper roll is hydraulically moveable up and down.
- Separated and moveable control panel
- Guide rolls are adjustable manually in one direction.
- Manual lubrication.
- Horizontal and vertical working.
- Including brake motor
- Production quility certified by ce, iso9001-2015, tesk ve turqum.
RP Pro 80 & RP Pro 100 Standard Features
- Special rolls for tubes, profiles, and angles.
- Adjustable guide rolls for angle profiles.
- Spiral bending device.
- Variable speed of rotation.
- The motor is in variable volts and frequency.
- For apk81, hydraulically, adjustment guide rolls in two directions
- Digital display for hydraulic guide rolls
- Nc playback control system
- Cnc graphic control system
RP Pro 120 Standard Features
- Steel (st-52) construction body.
On apk101 and apk 121, the rolls are driven by a hydraulic motor+planetary gearbox and gears.
Shafts are made of special steel, hardened and grinded.
On apk101, guide rolls are adjustable manually in one direction
On apk121, guide rolls are hydraulically adjustable in two directions.
One set standard rolls.
Manual lubrication.
Hydraulically movable lower rolls.
Separated and moveable control panel
Horizontal & vertical working
400 volt/50-60 hz.
Certified by ce, iso9001-2015, tsek and turqum.
Technical ParametersÂ
| TECHNICAL SPECIFICATION | RP Pro 35 | ROLLS VALUES | RP Pro 45 | ROLLS VALUES | RP Pro 50 | ROLLS VALUES | RP Pro 60 | ROLLS VALUES | RP Pro 80 | ROLLS VALUES | ||||||||
| MM | MINØ | MM | MINØ | MM | MINØ | MM | MINØ | MM | MINØ | |||||||||
 | ANGLE LEG OUT | 40X5 | 400 | BC | 50X5 | 850 | BC | 50X50 | 1000 | AC | 30X30X3 50X50X5 | 250 500 | AD | 35X35X3 70X70X8 80X80X8 | 500 1200 1600 | AD | ||
 | ANGLE LEG IN | 40X5 | 500 | BC | 50X5 | 1200 | BC | 50X5 | 1200 | AC | 30X30X3 40X40X5 50X506 | 400 600 1000 | AD | 40X40X4 70X70X9 80X80X8 | 600 1000 2000 | AD | ||
 | T SECTION LEG OUT | 50X6 | 800 | A | 50 | 650 | A | 50 | 600 | A | 30X30X3 80X40X7.5 | 300 600 1000 | A | 70X30X4 70X70X8 80X80X8 | 400 1000 1400 | A | ||
 | T SECTION LEG IN | 50 | 850 | A | 50 | 900 | A | 50 | 600 | A | 30X30X3 50X50X6 70X35X6 | 300 600 1200 | A | 30X30X4 70X70X8 80X80X8 | 400 1000 1400 | A | ||
 | T SECTION LEG SIDE | 50 | 800 | A | 50 | 750 | A | 50 | 600 | A | 40X10 60X20 80X25 | 220 500 2100 | A | 40X10 80X25 100X20 | 300 700 2100 | A | ||
 | PLATE HARD WAY | 50X10 | 800 | A | 60X10 50X12 | 800 800 | A | 50X15 | 1000 | A | 50X5 80X16 80X20 | 200 400 1200 | A | 50X10 80X20 120X30 | 260 400 600 | A | ||
 | PLATE EASY WAY | 80X15 | 700 | A | 120X15 | 750 | A | 80X16 | 1200 | A | 15 30 35 | 300 600 1400 | A | 30 40 45 | 300 500 1000 | A | ||
 | SQUARE | 30X30 | 700 | B | 35X35 20X20 | 1200 400 | B | 35X35 | 1400 | B | 20 35 40 | 300 600 800 | B | 35 50 60 | 300 500 1000 | B | ||
 | ROUND | Ø30 | 700 | A | Ø35 | 800 | A | Ø40 | 800 | B | 25X1.5 60X2 70X2 | 200 800 1600 | B | 40X2 100X2 100X3 | 400 2400 3000 | B | ||
 | TUBE | Ø60X2 | 1200 | B | Ø70X2 | 1200 | B | Ø70X2 | 1600 | B | 26.5X2.3 48.3X2.9 60.3X3.2 | 200 600 1000 | B | 48.3X3.2 88.9X3.2 88.9X4 | 400 1000 1600 | B | ||
 | TUBE-PIPE | Ø48.3X3.2 | 900 | B | Ø33.7X2.65 | 320 | B | Ø60.3X3.2 | 1000 | B | 30X15X15 60X30X2.5 80X30X3 | 300 2000 6000 | B | 50X25X2 80X40X5 100X40X3.0 | 600 2000 3000 | B | ||
 | RECTANGLE TUBE | 50X30X3 | B | 50X40X3 | B | 80X30X3 | 4000 | B | 20X20X2 50X50X2.5 60X60X3 | 240 1600 4000 | B | 40X40X2.7 70X70X3.2 70X70X4 | 500 1600 3000 | B | ||||
 | SQUARE TUBE | 40X40X3 | B | 60X60X3 | B | 60X60X3 | 4000 | B | UNP30 UNP60 UNP80 | 300 400 800 | AD | UNP60 UNP120 UNP140 | 400 800 1200 | AD | ||||
 | CHANNEL EASY WAY-LEGS OUT | UNP50 | 400 | B | UNP60 | 550 | B | UNP80 | 800 | B | UNP30 UNP50 UNP80 | 300 500 1000 | AD | UNP60 UNP120 UNP140 | 400 800 1200 | AD | ||
| CHANNEL EASY WAY-LEGS IN | UNP50 | 500 | B | UNP60 | 700 | B | UNP80 | 1000 | B | AD | INP120 | 500 | AD | |||||
| POWER | 0.75 | 1.5 | 1.1 | 4 | 5 | |||||||||||||
| ROLLS Ø | 137/132 | 155 | 157 | 177 | 245 | |||||||||||||
| SHAFT Ø | 35/30 | 50/50 | 50 | 60/60 | 80/80 | |||||||||||||
| BENDING SPEED | 2.1 M/MIN. | 4.3 M/MIN. | 2.95 M/MIN. | 6.4 M MIN. | 4.2 M MIN. | |||||||||||||
| WEIGHT | 190 | 320 | 500 | 970 | 1490 | |||||||||||||
| WxLxH | 670X530X1350 | 730X830X1500 | 950X1000X1450 | 950X1400X1450 | 1350X1600X1850 | |||||||||||||
* All dimensions are in mm
A=Standard Rolls
B=Special Rolls
C=Pulling Device
D=For bending without deformation and for serial prodcution special rolls are requested
E=Angle Device
F=Stretching Device
- Have any Query?
Rajesh Machines LLP
