Make Enquiry

Standard Equipment

  • Variable Stroke Adjustment With Limit Switch
  • Front Operator Control Box
  • Movable Foot Switch
  • Photo Safety Curtain
  • Stroke Counter
  • Operation & Maintenance Manual

Optional Equipment

  • PLC System With HMI
  • Remote Diagnostics
  • Die Table
  • Die Loader
  • Die Clamping
  • Pressure Strip
  • Die Cushion

Frame Construction:

Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table & Slide (Ram):

Table and Slide are made of high grade heavy duty cast iron / steel fabricated and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

Cylinder:

The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System:

The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical Control Panel:

The electric control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the international practices to help easily locate any fault and replace components conveniently.

Technical Parameters

Models Capacity Ram Size Daylight Stroke Shut height Table Size
LxW
Speeds (mm/Sec.) Electric Motor No. of
Cylinders
Working Ht. Working Pr. Weight of m/c
(Tons) (mm) (mm) (mm) (mm) (mm) Approach Pressing Return (HP.) (mm) (Bar) (Approx) tons
RHHP-5 5 80 300 300 350×300 20-25 5-8 30 3 1 (D/A) 700 200 1
RHHP-10 10 100 350 350 350×300 25-30 5-8 30 5 1 No.(D/A) 700 200 1.5 to 2
RHHP-15 15 120 400 400 400×300 25-30 5-8 30-40 5 1 No.(D/A) 700 200 1.5 to 2
RH HP-20 20 125 400 400 400×300 25 5-8 30 5 1 No.(D/A) 700 200 2
RH HP-25 25 125 400 400 450×300 25 5-8 30 5 1 No.(D/A) 700 200 2.5
RH HP-30 30 140 400 400 450×300 25 5-8 30 5 1 No.(D/A) 700 200 3
RH HP-50 50 200 400 450 500×500 70 10-15 80 7.5 1+2 750 200 4
RH HP-80 80 220 450 400 100 600×500 70 10-15 80 7.5 1+2 750 200 4 to 5
RHHP-100 100 250 500 450 150 600×600 80 10-15 90 7.5 1+2 750 200 5
RHHP-125 125 270 700 550 150 600×600 80 10-15 90 10 1+2 750 200 5 to 6
RHHP-150 150 300 700 550 150 650×500 80 10-15 90 15 1+2 750 200 6
RH HP-200 200 350 700 500 200 800×600 80 10-15 90 15 1+2 750 200 9 to 10
RH HP-250 250 400 800 550 250 800×600 100 15-20 110 20 1+2 750 200 10
RH HP-300 300 440 800 600 200 900×700 100 15-20 110 25 1+2 750 200 10 to 11
RH HP-350 350 470 900 600 300 900×700 120 15-20 130 25 1+2 750 200 12
RH HP-400 400 510 900 600 300 1000×800 120 15-20 130 30 1+2 750 200 12 to 13
RH HP-500 500 565 1000 700 300 1200×800 130 20-25 140 40 2+2 750 200 13 to 14
RH HP-600 600 440 1000 700 300 1250×900 130 20-25 140 40 2+2 800 200 16 to 18
RH HP-700 700 470 1000 700 300 1250×900 150 20-25 160 40 2+2 800 200 22 to 25
RH HP-800 800 510 1000 700 300 1500×1000 150 20-25 160 50 2+2 800 200 26 to 28
RH HP-900 900 530 1200 800 400 1500×1000 150 20-25 160 50 2+2 800 200 30 to 35
RHHP-1000 1000 565 1200 800 400 1500×1200 180 20-25 200 75 2+2 800 200 35 to 40
RHHP-1200 1200 510 1500 1000 500 2000×1500 180 20-25 200 75 3+4 800 200 45
RHHP-1500 1500 565 1500 1000 500 2000×1500 200 30 210 100 3+4 800 200 50

* All dimensions are in mm

Send Enquiry