Make Enquiry

Standard Equipment

  • Front Operator Control Box
  • Operation & Maintenance Manual

Optional Equipment

  • Die and Punch Tooling
  • Anti-vibration mount
  • Base Plate

Frame Construction:

Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Cylinder:

The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System:

The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Technical Parameters

Ton Distance Between
Two Column
Bed to Ram Stroke Hand
Operated
Stroke Power
Operated
HP Rod Size
15 750×200 125 100 200 2 55
25 800×250 150 125 200 2 65
40 950×350 175 150 250 2 85
60 1000×400 175 150 250 3 100
80 1100×450 175 150 300 3 105
100 1200×600 175 150 300 3 125
150 1250×600 200 350 5 150
200 1300×600 200 350 5 200
250 1300×650 200 400 7.5 200

* All dimensions are in mm

Send Enquiry