Make Enquiry

Standard Equipment

  • Variable Stroke Adjustment With Limit Switch
  • Front Operator Control Box
  • Movable Foot Switch
  • Stroke Counter
  • Operation & Maintenance Manual

Optional Equipment

  • PLC System With HMI
  • Remote Diagnostics
  • Die Table
  • Die Loader
  • Die Clamping
  • Pressure Strip
  • Die Cushion
  • Photo Safety Curtain

Frame Construction:

Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table & Slide (Ram):

Table and Slide are made of high grade heavy duty cast iron / steel fabricated and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

Cylinder:

The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System:

The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of machine, on top between two side plates. Pressure relief value is provided to safe guard the system and Machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical Control Panel:

The electric control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the international practices to help easily locate any fault and replace components conveniently.

Technical Parameters

Model No. RFPH-10 RFPH-10 RFPH-30 RFPH-50 RFPH-80 RFPH-100 RFPH-150 RFPH-200 RFPH-300
Capacity Tonnage 10 20 30 50 80 100 150 200 300
Motor HP 2 3 5 7.5 10 10 15 20 30
Stroke mm 300 350 400 500 500 600 600 750 750
Size of Slide mm 500×500 600×600 700×700 800*800 1000×1000 1000*1000 1100*1100 1250×1250 1500×1500
Size of table mm 500×500 600*600 700*700 800*800 1000×1000 1000*1000 1100×1100 1250×1250 1500*1500
Shut Height mm 100 100 100 100 100 100 100 250 250
Day Light mm 400 450 500 600 600 700 700 1000 1000
Return speed mm/Sec. 65 65 65 65 65 65 65 65 65
Advance Speed mm/Sec. 42 42 42 42 42 42 42 42 42
Working Speed mm/Sec. 8 8 8 8 8 8 8 8 8

* All dimensions are in mm

Send Enquiry