Make Enquiry

Standard Equipment

  • Pneumatic Wet Clutch
  • PLC Control With Fault Finding System
  • Auto Grease Lubrication System
  • Motorized Slide Adj.
  • Knock Out System
  • Die Height Indicator
  • Counter Balancer of Slide
  • Anti-repeat Safety Device
  • Air Outlet / Miss-Feed Detector Socket
  • Rotary Cam Limit Switch
  • Electric Control Panel and Production Counter
  • Operation & Maintenance Manual
  • SMC/FESTO Make FRL & Pneumatic Fitting
  • ROSS/ Toyoki Japan Make Dual Solenoid Valve

Optional Equipment

  • Power Take Off Shaft
  • Pneumatic Die Cushion
  • Variable Speed Drive
  • Photo Safety Curtains
  • Variable Stroke Adj.
  • Quick Die Changer
  • Extra Base Plate
  • Inclinable Type
  • Anti-Vibration Mount

Frame Construction:

Cross Shaft Precision Press fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

High Precision Transmission Gear:

The high accurately machined gear system provides smooth and silent operation.

Table & Slide (Ram):

Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

Long Hexagonal Gibs:

Durable alloy bronze lining fixed directly on the frame without the defect of losing adjusting bolts. Durable lining can also maintain high accuracy and extend the life of tooling.

High Quality Crank Shaft:

The strong crank shaft with outstanding rigidity ensures that accuracy can be maintained under qualified standard and extends the life of tooling.

Motorized Slide Adjusting Device:

The Motorized slide adjusting device is adopted with a thin brake motor and operated with push buttons. It provides stable positioning accuracy and quick adjustment.

Flywheel:

Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the cutting operations, and properly balanced for smooth running.

Auto Lubrication System:

The auto lubrication system with default monitor ensures high reliable operation.

Dual Safety Valve:

The interlock mechanism on the dual valve keeps the clutch and brake from mis-actuation when valve is default.

Die Height Indicator:

Motorized slide adjusting devise fitted with 0.1 mm increment digital die height indicator.

Hydraulic Overload Protector:

The Hydraulic overload protector is installed to prevent the overloading from exceeding the rating capacity tonnage and protect press and tooling from damage. The simple resetting process makes the restart operation easily.

Pneumatic wet clutch:

Multi-plate, Low initial design for quick response operation. High intermittent allowance for robot automatic operation. No pollution and low noise correspond the future environmental requirement.

Technical Parameters

Specification Unit RXW-25 RXW-45 RXW-60 RXW-80 RXW-100 RXW-125 RXW-160 RXW-200 RXW-250 RXW-315 RXW-400
Nominal Capacity Pe KN 250 450 600 800 1000 1250 1600 2000 2500 3150 4000
Nominal Sp mm 3 4 4 5 5 6 6 6 6.5 7 8
Stroke S mm 80 120 140 160 160 180 200 220 220 220 250
SPM Fixed n Times/min 100 80 70 60 55 50 45 45 30 30 30
Variable Times/min 60-120 50-95 45-85 40-75 35-65 35-65 30-55 30-55 20-35 20-35 20-35
Die Height H2 mm 250 270 300 320 335 350 400 450 500 500 550
Die Height Adjustment n mm 50 60 70 80 90 90 100 110 120 120 120
Throat Depth C1 mm 210 225 270 310 330 350 400 430 450 450 490
Clear Distance Between Uprights d1 mm 450 515 560 610 670 670 736 910 980 980 1050
Slide Bottom Size LxR a mm 360 410 480 540 620 620 700 880 950 950 1020
FxB b mm 250 340 400 460 520 520 580 650 700 700 750
Shank Hole Size Dia d mm 40 50 50 50 70 70 70 70 70 70 70
Depth l mm 65 60 70 65 90 90 100 100 130 130 130
Bolster Thicknees LxR c mm 720 825 930 950 1060 1100 1175 1390 1500 1540 1700
FxB D mm 400 440 520 600 640 680 760 840 880 880 950
Blanking Hole Diameter 0 mm 150 150 150 180 180 200 220 250 270 270 290
Bolster Thicknees H3 mm 80 110 130 140 145 155 165 180 190 190 210
Floor to Bolster H1 mm 780 800 900 900 900 900 900 1000 1000 1000 1100
Overall Dimensions FxB A mm 1500 1585 1540 1765 2000 2040 2305 2600 2660 2720 2850
LxR B mm 945 1075 1200 1200 1300 1320 1420 1540 1640 1680 1750
H H mm 2120 2390 2570 2725 3010 3035 3215 3800 3850 3850 4140
Distance Between Foundation Bolts FxB b’ mm 980 1075 1100 1210 1365 1430 1665 2020 2100 2140 2185
LxR a’ mm 690 760 840 920 1020 1040 1140 1360 1460 1500 1570
Motor Power KW 3 5.5 5.5 7.5 7.5 11 15 18.5 22 30 37
Weight (Approximate) Kg 2450 3550 5150 6450 8650 9550 13600 19200 23200 26600 29500

* All dimensions are in mm

Send Enquiry